You can find videos, posts, photos and links to good web sites which will provide you with all of the detailed info you have to have.
Vinyl is one of the most popular maintenance-free siding materials for new construction and is relatively cheap, even in Chicago. It’s also one of the most manageable siding materials for do-it-yourselfers for vinyl siding installation.
There are many places that supply and stock numerous styles and colors and most of the trim, accessories, and tools you’ll need. Styles can include straight, dutch lap, clapboard, log, cedar shakes or shingles. It can also be shaped in scallops or board and batten. It’s not hard to learn the steps for vinyl siding installation.
The biggest challenges for DIYers are planning the layout and installing the proper trim for each area. Intelligent manufacturing allows you to install vinyl siding on any type of house. Be it a modern house or a specially built house, vinyl sliding will be available. However, there are many challenges and it may be wise to get a free quote for getting professionals to do it for you. You can get your free quote using the form below…
Vinyl siding manufacturers in Chicago claim that you can paint them, but with the colors that are available and the materials toughness no need will arise to paint it for years. However you may need to clean the dirt off occasionally.
Check your state and Chicago codes before starting any project.
Tools & Equipment required
for Vinyl Siding Installation:
Carpenter’s Square
Caulk
Chalk Line
Circular Saw
Drill
Felt Tip Pen
Fine-Toothed Blades
Framing Square
Galvanized Roofing Nails
Hacksaw
Hammer
Inside Corner Posts
J-Channel
Ladder
Level
Line Level
Mason’s Line
Nail Hole Punch
Outside Corner Posts
Saw Horses
Snap-Lock Punch
Straightedge
Tape Measure
Tin Snips
Under-Sill Trim
Unlocking Tool
Utility Knife
Vinyl Siding
First, understand the rules for installing vinyl, because of the expansion and contraction with varying temperatures. So always remember to accommodate thermal expansion where possible!
Next, get started by measuring and prepping the walls for vinyl. Then apply all the eaves and soffit which are made of metal followed by the vinyl corners and the flashing and trim around doors and windows. You’ll then start nailing the vinyl panels in place.
So there you have it. The most concise instructions for vinyl siding installation! Remember, you can get a free quote for installation using the form above – there’s no obligation and you can compare prices.
